News

The difference between gold and gold plating of printed circuit board manufacturers

2019-10-11 09:44:50 Juding Circuit Technology 337

The difference between the gold and gold plating of printed circuit board manufacturers: One


1. When printed circuit board manufacturers produce PCB circuit boards, the crystal structure formed by immersion gold and gold plating is different. The thickness of gold plating is much thicker than that of immersion gold. The gold plating will be yellower than gold, and the customer will be more yellow. satisfaction.


2. PCB board produced by printed board manufacturers is easier to solder than gold plating, which will not cause poor soldering and cause customer complaints. The stress of the immersion gold plate is easier to control, and it is more conducive to the processing of the bond for the bonded products. At the same time, because Shenjin is softer than gold plating, the gold plate is not wearable.


3. The PCB board produced by the printed board manufacturer has only nickel gold on the pad. The signal transmission in the skin effect is not affected by the signal in the copper layer.



The difference between the gold and gold plating of printed circuit board manufacturers: two


1. PCB board produced by printed board manufacturers is more dense than gold plating, and it is not easy to produce oxidation.


2. The PCB board produced by the printed board manufacturer has only nickel gold on the pad, so the solder joint on the line is more firmly combined with the copper layer. The project does not affect the spacing when making compensation.


3. PCB boards produced by printed board manufacturers are getting denser and denser, and the line width and spacing have reached 3-4 MIL. Gold plating is prone to shorts in gold wire. The gold plate has only nickel gold on the pad, so it will not produce a gold wire short circuit.

 

4, printed circuit board manufacturers of PCB circuit boards are generally used for relatively high requirements of the board, flatness is better, generally use Shen Jin, Shen Jin generally does not appear after the black pad phenomenon. The flatness and standby life of the immersion gold plate are as good as the gold plate.


Juding Circuit Technology is a professional PCB circuit board manufacturer, providing you with: PCB prototype, mass production, 1-34 layer PCB board, high TG board, immersion gold board, gold finger board, impedance board, HDI board, Rogers Boards, microwave boards, RF boards, radar boards, thick copper foil boards and other PCBs used to make various processes and materials. Welcome to contact customer service for more details!